Throttle Clamp
Toyota Modified Valve Body
As many Toyota and Jeep owners know, the AW4 / Toyota 340,
A340, and A341E series of transmissions are generally very
well made and demonstrate excellent durability in unmodified
applications. The framework is present for an extremely
strong transmission that is to be used in a High Performance
or extreme duty application.
The problem is that the original calibration is engineered
for driver comfort rather than ultimate component strength.
The soft, sliding shifts that are part of the original
design are not appropriate for increased horsepower
applications, towing, off road use, racing, etc.
These calibration inadequacies quickly manifest themselves
as extremely poor shift quality, and more often than not,
severe damage to the gearbox is soon to follow. One of the
most common symptoms of this is the engine stuttering or
hitting the rev limiter during a full throttle upshift.
Without going into too much technical detail, the factory
shortcomings can be addressed through modification and
recalibration of the control valve assembly, a.k.a. the
valve body.
The valve body is a component that is comprised of valves,
solenoids, an orifice separator plate and an intricate
series of passages- it is the most complex component in the
most complex part of your vehicle- the automatic
transmission.
The function of the valve body is to act as the "brain" of
the automatic transmission- it directs hydraulic pressure to
the appropriate clutches and bands at the right time to
initiate upshifts, down shifts, selection of reverse,
converter clutch application, etc. As well as controlling
shift timing and shift quality, it is also responsible for
directing hydraulic pressure to the cooler and the
lubrication circuit.
As you can imagine, the transmission's operational
characteristics can be drastically altered and also
customized to the given application through modifications to
this component.
Because there are no commercially available shift kits for
these transmissions, we began working on valve body
modifications that were appropriate for Supras, Jeeps with
the AW4 transmission, Toyota Tundra, Tacoma and 4Runner, and
also Lexus SUV's and rear drive passenger cars- especially
those that needed to handle the additional power that
accompanies the installation of a supercharger, turbo or
nitrous oxide injection.
At the risk of oversimplification, there are a few things
that are done in concert to create much more favorable
operation of the gearbox.
The first thing that needs to be done is to increase the
hydraulic operating pressure of the transmission- this
pressure is known as "line pressure". All hydraulic
functions of the transmission are based on this pressure-
what is especially of concern for these purposes is the
clamping force which is applied to the clutches and bands to
get them to hold against engine torque.
In simple terms, increased engine output is complemented by
increased line pressure and increased "clamp" on the
clutches- this can be likened to a performance clutch with a
heavier pressure plate spring in a manual transmission
equipped vehicle.
The idea is to raise this pressure only slightly at light
throttle but increase it by 30-40% at full throttle- where
it is really needed. The effects of this are shifts that are
not overly uncomfortable at lower throttle openings, while
at heavier throttle, firm shifts with much shorter clutch
application time and increased clamping force can be
achieved.
An additional benefit of this is increased flow through the
transmission's cooler and lube system.
Secondly, hydraulic pressure is normally routed through an
orifice in a metal "separator plate" that resides between
the two halves of the valve body before it gets to its
intended destination. By altering these orifices, we can
increase the volume of hydraulic oil that is used to apply
the various clutches and bands.
The final part of modification is the alteration of the
accumulator circuits. These are hydraulic circuits that are
parallel to the components that are used for shifting. Their
function is to absorb or "accumulate" some of the hydraulic
pressure that is intended to apply a clutch pack or band. By
limiting the action of what is essentially a "shock
absorber" for each shift, we are able to further reduce
clutch lock up time and shift lag at wide open throttle.
The end result is that shift time is reduced by 30 to 80%,
depending on the amount of acceptable shift feel and the
intended application. The clamping force that is required to
apply the clutches and bands is increased by 30 to 40% at
full throttle. Flow through the cooler and lube circuit is
increased and the converter clutch application time is also
reduced.
Transmission and valve body upgrades are not only for
American made vehicles anymore. Increased performance and
more efficient shifting is now available for vehicles of
almost every manufacturer thanks to the few companies that
are willing to do the research and development work required
for this rapidly growing segment of the automotive
aftermarket.
About the Author
John Lombardo is owner of
IPT Performance Transmissions
and has been in the high performance industry for over 20 years
IPT tech info, specials and a $25 coupon via email
Dr Cruise Motorcycle Throttle Lock Attachment
 |
 BLACK CUSTOM THROTTLE CLAMP SET DUAL CABLE FOR HARLEY 1 HANDLEBARS SLEEVE HOLD $14.99 Time Remaining: 24d 17h 34m Buy It Now for only: $14.99 Buy It Now |
 HARLEY CUSTOM THROTTLE AND IDLE CABLE CLAMP HOLD DOWN DOUBLE CABLES $9.99 Time Remaining: 1d 7h 14m Buy It Now for only: $18.00 Buy It Now |
 CHROME 1 THROTTLE CLAMP SET DUAL CABLE FOR HARLEY 81 UP CUSTOM 1 HANDLEBARS $8.95 Time Remaining: 18d 19h 16m Buy It Now for only: $8.95 Buy It Now |
 BLACK THROTTLE CLAMP SET SINGLE CABLE FOR 74 80 HARLEY 1 HANDLEBARS $11.49 Time Remaining: 26d 20h 58m Buy It Now for only: $11.49 Buy It Now |
 CHROME DUAL THROTTLE CABLE CLAMP FOR HARLEY 1 1 4 HANDLEBARS DIE CAST $9.95 Time Remaining: 4d 19h 28m Buy It Now for only: $9.95 Buy It Now |
 HARLEY THROTTLE AND IDLE CABLE CLAMP HOLD DOWN GREAT FOR DOULE CABLES $9.99 Time Remaining: 1d 6h 50m Buy It Now for only: $19.00 Buy It Now |
 New Black Billet Throttle Clamp CRF50 KLX 110 Pit Bike 7 8 Bar Bike $14.99 Time Remaining: 21d 18h 32m Buy It Now for only: $14.99 Buy It Now |
 RED CNC THROTTLE CLAMP HONDA XR CRF XR50 CRF50 50 BIKE $33.95 Time Remaining: 5d 6h 26m Buy It Now for only: $33.95 Buy It Now |
 RED CNC THROTTLE CLAMP HONDA XR CRF XR50 CRF50 CL05 $33.95 Time Remaining: 13d 1h 37m Buy It Now for only: $33.95 Buy It Now |
 CHROME CLUTCH THROTTLE BRAKE CABLE CLAMP FOR HARLEY 1 1 4 TUBING SINGLE THROTLE $14.95 Time Remaining: 27d 21h 38m Buy It Now for only: $14.95 Buy It Now |
 HARLEY THROTTLE AND IDLE CABLE CLAMP HOLD DOWN GREAT FOR DOULE CABLES $9.99 Time Remaining: 1d 7h 8m Buy It Now for only: $19.00 Buy It Now |
 BLACK CUSTOM THROTTLE CLAMP SINGLE CABLE FOR HARLEY 1 HANDLEBARS 5 16 81 95 $14.99 Time Remaining: 24d 16h 39m Buy It Now for only: $14.99 Buy It Now |
 BLACK THROTTLE GRIP ASSEMBLY CLAMP DUAL CABLE FOR HARLEY 1 HANDLEBARS 81 UP $19.95 Time Remaining: 26d 21h 24m Buy It Now for only: $19.95 Buy It Now |
 Harley 1 Inch Chrome Throttle Clamp Housing $32.00 Time Remaining: 5d 23h 45m Buy It Now for only: $32.00 Buy It Now |
 HARLEY THROTTLE AND IDLE CABLE CLAMP HOLD DOWN GREAT FOR DOULE CABLES $11.99 Time Remaining: 1d 7h 5m Buy It Now for only: $25.00 Buy It Now |
 CHROME CUSTOM THROTTLE CLAMP SET DUAL CABLE FOR HARLEY 1 HANDLEBARS SLEEVE HOLD $13.99 Time Remaining: 18d 18h 9m Buy It Now for only: $13.99 Buy It Now |
 BLACK THROTTLE GRIP ASSEMBLY CLAMP SINGLE CABLE FOR HARLEY 1 HANDLEBARS 74 80 $19.95 Time Remaining: 26d 20h 50m Buy It Now for only: $19.95 Buy It Now |
 Throttle Cable Clamp SDG SSR CRF50 CRF70 CRF100 XR CRF 50 70 100 Pit Bike Atv $14.90 Time Remaining: 6d 11h 5m Buy It Now for only: $14.90 Buy It Now |
 CHROME CLUTCH SINGLE THROTTLE CABLE CLAMP FITS HARLEY 1 1 2 TUBING CUSTOM NEW $12.95 Time Remaining: 28d 21h 22m Buy It Now for only: $12.95 Buy It Now |
 Saitek Pr Flight Yoke System PZ44 with Throttle Quadrant Bundle Mounting clamp $65.00 (8 Bids) Time Remaining: 4d 1h 41m |
 1 INCH CHROME THROTTLE CABLE CLAMP FOR MOTORCYCLES $9.95 Time Remaining: 16d 19h 33m Buy It Now for only: $9.95 Buy It Now |
 1 INCH CHROME DUAL THROTTLE CLAMP FOR MOTORCYCLES $9.97 Time Remaining: 9d 21h 12m Buy It Now for only: $9.97 Buy It Now |
 PLASTIC THROTTLE CLAMP HONDA XR CRF XR50 CRF50 50 STOCK $9.95 Time Remaining: 14d 4h 52m Buy It Now for only: $9.95 Buy It Now |
 CHROME THROTTLE CLAMP SET SINGLE CABLE FOR HARLEY 74 80 $11.49 Time Remaining: 28d 20h 50m Buy It Now for only: $11.49 Buy It Now |
 Billet Throttle Cable Clamp Fits 84 Later Models CHROME P N 91274 04 $5.50 (2 Bids) Time Remaining: 3d 3h 11m Buy It Now for only: $20.00 Buy It Now |
 Wicked Image Throttle Cable Clamp $16.95 Time Remaining: 21d 21h 5m Buy It Now for only: $16.95 Buy It Now |
 BLUE CNC THROTTLE CLAMP HONDA XR CRF XR50 CL07 $33.95 Time Remaining: 13d 1h 21m Buy It Now for only: $33.95 Buy It Now |
 CHROME DUAL THROTTLE CABLE CLAMP FOR HARLEY 1 BARS NEW $9.95 Time Remaining: 27d 21h 51m Buy It Now for only: $9.95 Buy It Now |
 Air Intake Adapter Boot Throttle Body Adapter 3 into 25 Heavy Duty w Clamps $0.99 Time Remaining: 4h 13m |
 RED BILLET THROTTLE CLAMP XR50 CRF50 CRF XR 50 PITBIKE $24.95 Time Remaining: 26d 4h 26m Buy It Now for only: $24.95 Buy It Now |
 PRO TAPER CONTOUR KX BARS W CLAMPS BARK BUSTERS+THROTTLE KAWASAKI KDX 220 200 $165.00 Time Remaining: 28d 2h 52m Buy It Now for only: $165.00 Buy It Now |
 CUSTOM CHOPPER CHROME THROTTLE CONTROL SLEVE CLAMP FX SPORSTER FL SINGLE CABLE $25.00 Time Remaining: 6d 2h 33m Buy It Now for only: $25.00 Buy It Now |
 CHROME CUSTOM THROTTLE CLAMP SINGLE CABLE FOR HARLEY 1 HANDLEBARS 5 16 81 95 $13.99 Time Remaining: 18d 17h 58m Buy It Now for only: $13.99 Buy It Now |
 Wild 1 Throttle idle brake line guide 0658 0017 Harley Cable Frame Mount Clamp $14.99 Time Remaining: 3d 20h 49m |
 GLOSS BLACK DUAL CABLE 1 THROTTLE CLAMP UNIVERSAL HARLEY CUSTOM BOBBER CHOPPER $19.95 Time Remaining: 28d 18h 49m Buy It Now for only: $19.95 Buy It Now |
 1 4 OPENING SINGLE THROTTLE CABLE CLAMP FOR HARLEY 49MM TUBING CLUTCH BRAKE NEW $11.95 Time Remaining: 18d 19h 38m Buy It Now for only: $11.95 Buy It Now |
 DRAG SPECIALTIES DCTHROTTLE CABLE CLAMP 1 $12.95 Time Remaining: 22d 15h 47m Buy It Now for only: $12.95 Buy It Now |
 THROTTLE CLAMP STOCK HONDA XR CRF XR50 CRF50 50 CL03 $6.95 Time Remaining: 3h 29m Buy It Now for only: $6.95 Buy It Now |
 Air Intake Adapter Boot Throttle Body Adapter 3 into 25 Heavy Duty w Clamps $0.99 Time Remaining: 19h 51m |
 Kawasaki 650 SX Anodized Aluminum Handle Bars Quick Steer Plate Bar Clamps WoW $39.95 Time Remaining: 29d 6h 23m Buy It Now for only: $39.95 Buy It Now |
 Billet Aluminum Chrome Dual Throttle Cable Clamp Separator Harley Davidson $13.50 Time Remaining: 7d 18h 13m Buy It Now for only: $13.50 Buy It Now |
 CHROME CLUTCH SINGLE THROTTLE CABLE CLAMP FITS HARLEY 1 3 4 TUBING CUSTOM NEW $11.95 Time Remaining: 28d 22h 9m Buy It Now for only: $11.95 Buy It Now |
 Air Intake Adapter Boot Throttle Body Adapter 3 into 25 Heavy Duty w Clamps $0.99 Time Remaining: 1d 17h 20m |
 1 4 HOLE OPENING CHROME SINGLE THROTTLE CABLE CLAMP FOR HARLEY 1 TUBING $11.95 Time Remaining: 28d 21h 56m Buy It Now for only: $11.95 Buy It Now |
 GOLD CNC THROTTLE CLAMP HONDA XR CRF XR50 CL08 $33.95 Time Remaining: 13d 1h 23m Buy It Now for only: $33.95 Buy It Now |
 1 3 8 34MM CHROME CLUTCH THROTTLE CABLE CLAMP HOLDER $21.33 Time Remaining: 7d 17h 18m Buy It Now for only: $21.33 Buy It Now |
 ALUM THROTTLE CLAMP HONDA XR CRF XR50 CRF50 50 CL02 $9.95 Time Remaining: 2h 49m Buy It Now for only: $9.95 Buy It Now |
 Air Intake Adapter Boot Throttle Body Adapter 3 into 25 Heavy Duty w Clamps $0.99 Time Remaining: 3d 17h 20m |
 CUSTOM DUAL CABLE THROTTLE CLAMP FOR HARLEY $14.95 Time Remaining: 6d 25m Buy It Now for only: $14.95 Buy It Now |
 Throttle Clamp Twist Grip Chinese Scooter Parts GY6 150cc QMB139 50cc $9.99 Time Remaining: 21d 19h 6m Buy It Now for only: $9.99 Buy It Now |
 CHROME 1 1 4 DUAL THROTTLE CABLE CLAMP 0658 0024 $12.99 Time Remaining: 28d 23h 54m Buy It Now for only: $12.99 Buy It Now |
 Biker's Choice THROTTLE IDLE CABLE CLAMP 061090 Sale Price: $7.50  Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product  |
 Saitek Pro Flight Yoke with Three-Lever Throttle (PZ44) List Price: Sale Price: $125.84 You save: $39.15 (24%) Eligible for free shipping!Availability: Usually ships in 3 to 5 days See Reviews For This Product DescriptionPrecision. Realism. Control. The Saitek Pro Flight Yoke System is highly engineered to meet the exacting needs of the true flight simulation enthusiast. Stainless steel shaft, ergonomic controls, integrated chronograph, and separate throttle quadrant ensure a smooth, accurate and totally realistic flying experience... |
 CABLE CLAMP THROTTLE/IDLE Sale Price: $10.95 Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionNo color and Size Match |
 FLY THROTTLE TUBES, TOP CLAMPS FLY HANDLEBAR INSERT PT-INS Sale Price: $24.20 Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionPhoto's are for reference only. Please read item title carefully as the manufacturers part number is the item you will receive. |
 Biker's Choice CHROME THROTTLE CLAMP 19446BS1 Sale Price: $14.81 Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionBiker's Choice CHROME THROTTLE CLAMP 19446BS1 |
